DS21554 |
RFQ for DS21554 Required Field |
 |
| Technical/Catalog Information | DS21554G |
| Vendor | Maxim Integrated Products |
| Category | Integrated Circuits (ICs) |
| Number of Circuits | 1 - Single |
| Package / Case | 100-CSBGA |
| Logic Type | E1 Single-Chip Transceiver |
| Packaging | Tray |
| Mounting Type | * |
| Number of Inputs | * |
| Current - Output High, Low | * |
| Supply Voltage | * |
| Operating Temperature | * |
| Voltage - Supply | * |
| Drawing Number | * |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | DS21554G DS21554G |
| Product | Manufacturers | Pack | D/C |
| DS21554 | - | TQFP | 99+ |
The DS21354/DS213554 single-chip transceivers (SCTs) contain all the necessary functions to connect to E1 lines. The devices are upward-compatible versions of the DS2153 and DS2154 SCTs. The on-board clock/data recovery circuitry coverts the AMI/HDB3 E1 waveforms to an NRZ serial stream. Both devices automatically adjust to E1 22AWG (0.6mm) twisted-pair cables from 0 to over 2km in length. They can generate the necessary G.703 waveshapes for both 75 coax and 120 twisted cables. The on-board jitter attenuator (selectable to either 32 bits or 128 bits) can be placed in either the transmit or receive data paths.
The framer locates the frame and multiframe boundaries and monitors the data stream for alarms. It is also used for extracting and inserting signaling data, Si, and Sa-bit information. The on-board HDLC controllercanbe used for Sa-bit links or DS0s. The devices contain a set of internal registers that the user can access to control the operation of the units. Quick access through the parallel control port allows a single controller to handle many E1 lines. The devices fully meet all the latest E1 specifications, including ITU-T G.703, G.704, G.706, G.823, G.732, and I.431, ETS 300 011, 300 233, and 300 166, as well as CTR12 and CTR4.
Features |
| Complete E1 (CEPT) PCM-30/ISDN-PRI Transceiver Functionality On-Board Long- and Short-Haul Line Interface for Clock/Data Recovery and Waveshaping 32-Bit or 128-Bit Crystal-Less Jitter Attenuator Frames to FAS, CAS, CCS, and CRC4 Formats Integral HDLC Controller with 64-Byte Buffers Configurable for Sa Bits, DS0, or Sub-DS0 Operation Dual Two-Frame Elastic Store Slip Buffers that can Connect to Asynchronous Backplanes up to 8.192MHz Interleaving PCM Bus Operation 8-Bit Parallel Control Port that can be used Directly on Either Multiplexed or Nonmultiplexed Buses (Intel or Motorola) Extracts and Inserts CAS Signaling Detects and Generates Remote and AIS Alarms Programmable Output Clocks for Fractional E1, H0, and H12 Applications Fully Independent Transmit and Receive Functionality Full Access to Si and Sa Bits Aligned with CRC-4 Multiframe Four Separate Loopback Functions for Testing Functions Large Counters for Bipolar and Code Violations, CRC4 Codeword Errors, FAS Word Errors, and E Bits IEEE 1149.1 JTAG-Boundary Scan Architecture Pin Compatible with DS2154/52/352/552 SCTs 3.3V (DS21354) or 5V (DS21554) Supply; Low-Power CMOS 100-pin LQFP package (14mm x 14mm) |
| Models | MFG | Pack |
| DS2001 | ||
| DS2001CJ DS9665CJ | ||
| DS2107CS | ||
| DS2107S | ||
| DS2107S/AS/AE | ||
| DS2108 | Maxim | SOP24 |
| DS2108S | ||
| DS2108S/TR | ||
| DS2109 | Maxim | SOP24 |
| DS2109S | ||
| DS2109S/TR | ||
| DS2109S-TR | ||
| DS2110 | ||
| DS21107E | ||
| DS2110AA | ||
| DS2110S | ||
| DS2112 | ||
| DS2112A | ||
| DS2114Z | ||
| DS21154-AB |
